Xinghua Puduote Metal Products Co., Ltd.

Contact us

Xinghua Puduote Metal Products Co., Ltd.
Contacts:Mr. Gu
Phone:13951177338
Fax:0523-83771180
Email:puduote@puduote.com

Address:Zhang Shuai Road, Dainan Town, Xinghua City, Jiangsu Province


Company NewsPrecautions for painting non-standard titanium chain surface

Precautions for painting non-standard titanium chain surface

Source: Xinghua Pudote Metal Products Co., Ltd.Popularity:Issuing time:2019-07-25 17:06

  Xinghua Pudote Metal Products Co., Ltd. is a professional supplier of mechanical parts and non-standard parts. It integrates product design, manufacture and sales. It mainly focuses on deep processing and exquisite processing of stainless steel and titanium products. The main products are Titanium chain, high temperature welded pipe, special screw, etc. The following describes the precautions for the surface coating of non-standard titanium chains:

  1. Non-standard titanium chain sprayed rust-removed surface should be immediately coated with primer. Paint should be carried out in a clean place, the ambient temperature should be above 5 °C, the humidity should be below 85%, and the surface temperature of the workpiece should not be More than 60 ° C;

  2. When there are no special requirements for each component, one layer of primer (excluding maintenance primer) should be applied on the top layer. No paint leakage is allowed. The color of each layer should be different. The dry film thickness of each layer is 25~. 35 um, the total thickness of the paint dry film is not less than 75um; the non-standard titanium chain smooth roller and the idler working surface can be coated with only one layer of anti-rust paint or top coat, and the inner wall of the roller is coated with rust paint. The exposed processing mating surface shall be coated with protective lipum, and the exposed non-complexing surface (excluding the frame) shall be coated with a topcoat or primer with a dry film thickness of at least 35 feet;

  3. After the installation and commissioning, the top coat should be applied again. Before painting, the parts damaged during transportation and installation should be repaired;

  4, non-standard titanium chain primer, the coating of the intermediate layer paint is not allowed to have pinholes, bubbles, cracks, shedding, sagging, leakage coating and other defects; topcoat requirements are uniform, bright, complete.

下一篇:没有了
Xinghua Puduote Metal Products Co., Ltd. All rights reserved
Address:Zhang Shuai Road, Dainan Town, Xinghua City, Jiangsu Province
Phone:13951177338Fax:0523-83771180
Main area:
Technical Support: YouShangbao